EMT Practice Test

1. Question Content...

---

Question1: One of the below ACLs will enable the allowance requests from Engineering groups to www.netapp.com, which one is it?

Question2: Which one of the following object types are not cacheable?

Question3: How can the Network Appliance field alerts be received?

Question4: An architect is designing an Oracle FlexPod solution that must support non-disruptive upgrades across all of the hardware components. The Oracle workload requires a 4-node FAS system, including the NetApp CN1610 cluster interconnect switches.
In this scenario, how many 10GbE ISL links are required between the two cluster interconnect switches?

Question5: Which tool may be used to determine the optimal UCS hardware configurations for SAP, Oracle, and Microsoft Enterprise Applications FlexPod solutions?

Question6: Which one of the following access methods will maintain boot messages across reboots?

Question7: The console password can only be changed via ____.

Question8: You are asked to configure your company's new Cisco MDS switch so that the engineering department's FC storage traffic is logically isolated from the marketing department's traffic.
In this scenario, what will accomplish this task?

Question9: What are three capabilities of Config Advisor as it pertains to a FlexPod solution? (Choose three.)

Question10: What must be done in order to add a user to the appliance database, which two of the following you must enter?

Question11: A FlexPod solution is being designed using Nexus 9000 series switches.
What are three Layer 2 high-availability features that are available in this scenario? (Choose three.)

Question12: You want to provision and back up storage for specific applications in your NetApp FAS environment. You decide to use NetApp Snapshot copies for application-consistent backups.

Question13: All of the following are supported interface types EXCEPT _______.

Question14: To add a user to the appliance database, you must enter the _____ and the _____.

Question15: You are designing a new bare metal FlexPod solution for an Oracle RAC environment and want to leverage online resources to ensure your overall design is following FlexPod design best practices.
In this scenario, which validated resource would you use for your design?

Question16: With Data ONTAP 8.2 or later, a two-node cluster has which two connections? (Choose two.)

Question17: You want to ensure minimal disruption to the UCS fabric in the case of a port failure between the blade chassis and the Fabric Interconnects of your FlexPod configuration.
Which industry best practice would you implement as a global configuration to accomplish this task?

Question18: Which guide ensures that the NetApp hardware and software components are supported with the version of Data ONTAP that you plan to install?

Question19: Which Cisco UCS modular LAN on a motherboard (mLOM) adapter provides two ports of 40-Gbps Ethernet or eight ports of 10-Gbps Ethernet with Fibre Channel over Ethernet (FCoE) capability?

Question20: Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?

Question21: Which high-availability feature is supported by FlexPod with Unified Computing System Mini (UCS Mini) in a single chassis?

Question22: Which two connectivity modes are supported for Cisco UCS C-Series Rack-Mount Server management beginning with UCS Manager 2.2? (Choose two.)

Question23: According to FlexPod CVDs, what is the recommended MTU size for iSCSI logical interfaces (LIFs) on the NetApp Storage Virtual Machine (SVM)?

Question24: The ___ command is used to run automated diagnostic analysis routines.

Question25: You are configuring a UCS host for an iSCSI SAN boot. In this scenario, which storage variable must be recorded for boot policy creation?

Question26: Which TWO of the following statements are equivalent?

Question27: A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?

Question28: Which of the following must you successfully specify when configuring the NTLM authentication?

Question29: You are building a new FlexPod solution and want to verify that you have cabled all the components according to FlexPod design best practices prior to putting your solution into production.
Which tool would you leverage to validate the cabling?

Question30: You want to modernize a data center with stateless computing within a FlexPod. You are going to use UCS service profiles.
Which two statements are true in this scenario? (Choose two.)

Question31: Which of the following statements best describes what occurs with system messages?

Question32: The configure "Shared User Hosts" feature under the Appliance Manager's Setup > FTP > Caching Behavior is used to specify:_____ .

Question33: What is the traceroute command used for?

Question34: The traceroute command is used to ____.

Question35: Which of the following is an example of a Cisco UCS high availability component?

Question36: As a consequence of executing the ACL: redirect "www.pass4test.com" url www.netapp.com which of the following is destined to happen?

Question37: Cisco UCS Manager supports which three remote authentication methods? (Choose three.)

Question38: In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?

Question39: What happens when the diag dump command is executed?

Question40: The backup/restore options in the Maintenance section of the Appliance Manager are used to backup and restore _____.

Question41: You are designing a new distributed environment of FlexPod systems across the entire organization. You will need to support FlexPod systems in two data centers and FlexPod with Cisco UCS Mini in your five manufacturing plants.
What are two benefits of deploying UCS Central in this scenario? (Choose two.)

Question42: Which of the following statements most accurately describes what would occur if she requested for www.microsoft.com considering the following ACL policies, assuming user Johnny is a member of the Engineering group?
- deny group Engineering and smartfilter gambling
- auth any
- allow group Execs
- deny any

Question43: An administrator plans to boot multiple VMware ESXi servers over FCoE within the FlexPod environment.
In this scenario, which UCS feature should be configured to ensure a unique SAN initiator for each host?

Question44: The FlexPod Data Center with VMware vSphere 5.1 solution utilizes a clustered file system that allows multiple hosts simultaneous read and write access to a single volume.
What is the name of this file system?

Question45: Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?

Question46: A customer needs to replicate NetApp FlexVols in an application agnostic manner for their virtualized and non-virtualized workloads. The customer also needs to migrate between on-prem, NetApp Private Storage (NPS), and ONTAP Cloud instances.
Which NetApp feature satisfies these requirements?

Question47: You have multiple clients that want to use FC. You want to ensure that data is kept separate across a FlexPod deployment.
In this scenario, which two constructs would you use to accomplish this task? (Choose two.)

Question48: The _____ log only reports Web request data.

Question49: You are designing a FlexPod Datacenter solution that supports Cisco Application Centric Infrastructure (ACI) with VMware vSphere. The customer wants to boot from SAN with FCoE-based LUNs.
What is the correct deployment topology in this situation?

Question50: State whether the following statement is true or false. The flush cache command does not reduce disk space utilization.

Question51: A customer is designing a FlexPod using a 4-node AFF8080EX cluster. The nodes will be cabled to NetApp recommendations.
In this scenario, which switch model would be used for the cluster interconnect network?

Question52: State whether the following statement is true or false. The sysstat command allows the performance statistics to be viewed, which consists of the present CPU usage, the full amount of network I/O, and the amount of disk I/O.

Question53: Which hardware device should provide Fibre Channel services in a FlexPod design?

Question54: What is the maximum number of chassis supported under a single UCS Manager domain?

Question55: Refer to the exhibit.

What would be the correct configuration for the ports labeled?

Question56: Refer to the exhibit.

The numerals in the red rectangle, what will be this servers Boot from SAN order?

Question57: State whether the following statement is true or false. Disk ID is represented in x.y format, where x refers to the host adaptor and y refers to the disk ID number.

Question58: You are designing a FlexPod solution and would like to configure ESXi hosts for SAN boot over FCoE.
Which switch would you use for zoning in this architecture?

Question59: VMware vCenter Server Appliance v6.0 supports which two types of databases? (Choose two.)

Question60: Exhibit:

Your customer wants to consolidate their multiple data center applications into a single FlexPod solution. The customer wants to maintain the current network protocols and storage tiers.
Referring to the exhibit, which set of FlexPod components satisfies the requirements?

Question61: State whether the following statement is true or false. All NetApp Services do not include System Administration Services.

Question62: A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)

Question63: Which one of the following services is not a service supported by ICAP?

Question64: Which traffic through a UCS 6200 cluster can be in Active-Standby mode?

Question65: Which is a post sales implementation configuration and health check tool for NetApp systems or FlexPod?

Question66: Which two statements are true about VMware vCenter Server capabilities? (Choose two.)

Question67: When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?

Question68: What is a primary feature of a Cisco Fabric Interconnect?

Question69: What is the maximum number of power supplies supported in a Cisco UCS 5108 blade server chassis?

Question70: Which of the following commands are used for running automated diagnostic analysis routines?

Question71: Which of the following options best describes what the configure "Shared User Hosts" feature that is found under Appliance Manager's Setup > FTP > Caching Behavior is used for?